Author Topic: Yet another pumps thread  (Read 80741 times)

Offline Julian

  • Administrator
  • Oil baron
  • *******
  • Posts: 6236
    • Used Cooking Oil Collection website
  • Location: East Surrey, UK.
Re: Yet another pumps thread
« Reply #690 on: July 03, 2018, 12:13:52 pm »
Anyone near Maryport fancy a big gear pump?

https://www.ebay.co.uk/itm/Rietschle-pump-lube-oil-transfer-WPB-25-20/183263706637

Comes with motor end of the coupling, just needs replacement motor.

Don't see gear pumps that size on eBay very often.


6000 l/m that would take just over a second to fill my processor don't think my reactions are quick enough to hit the stop switch in time!

Used Cooking Oil Collection website ... http://www.surreyusedcookingoilcollection.palmergroup.co.uk

Offline knighty

  • Wiki Editor
  • Valve head
  • ****
  • Posts: 471
  • Location: Sunderland, UK
Re: Yet another pumps thread
« Reply #691 on: July 03, 2018, 10:43:59 pm »
first data plate says 1.1kw... that's not enough to shift that much?

second data plate says 21 cubic meters per hour, about 350litres/min... but also says 9.55kw (maybe 8.55?)

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 4867
  • Biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton
Re: Yet another pumps thread
« Reply #692 on: July 04, 2018, 01:34:14 pm »
It is a "lube pump" so possibly designed for high flow but low pressure?

I did wonder if the flow rating was a mistake, or there was supposed to be a decimal point in there somewhere.  The ports don't look anywhere big enough to pass 100 litres per second.

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 4867
  • Biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton
Re: Yet another pumps thread
« Reply #693 on: February 25, 2019, 10:27:44 am »
Decent Mono for 20 in Bury St Edmunds

https://www.ebay.co.uk/itm/202606681372